巡航导弹INS/视觉组合导航方法

巡航导弹仅依靠惯性导航系统进行导航时,其导航误差将随着时间的累积不断变大。INS/GPS是最常用的组合导航方式,但存在战时不可用的缺陷。为此提出了一种基于EKF的巡航导弹INS/视觉组合导航方法。利用巡航导弹相对于单个已知点地标的视觉信息(方位角和高度角)和高度信息,巡航导弹INS的位置和速度误差能够同时被估计出来。最后,仿真验证了该方法的有效性。     

Model parameter estimation and residual life prediction for a partially observable failing system

We consider a partially observable degrading system subject to condition monitoring and random failure. The system's condition is categorized into one of three states: a healthy state, a warning state, and a failure state. Only the failure state is observable. While the system is operational, vector data that is stochastically related to the system state is obtained through condition monitoring at regular sampling epochs. The state process evolution follows a hidden semi‐Markov model (HSMM) and Erlang distribution is used for modeling the system's sojourn time in each of its operational states. The Expectation‐maximization (EM) algorithm is applied to estimate the state and observation parameters of the HSMM. Explicit formulas for several important quantities for the system residual life estimation such as the conditional reliability function and the mean residual life are derived in terms of the posterior probability that the system is in the warning state. Numerical examples are presented to demonstrate the applicability of the estimation procedure and failure prediction method. A comparison results with hidden Markov modeling are provided to illustrate the effectiveness of the proposed model. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 190–205, 2015     

正交频分复用/偏移正交振幅调制半盲信道估计

非合作通信背景下,针对传统干扰近似法(IAM)进行正交频分复用(OFDM)/偏移正交振幅调制(OQAM)系统信道估计需要导频符号值作为先验信息的问题,提出一种基于OQAM符号特征的IAM(OCBIAM)估计算法。该算法利用IAM导频结构和OQAM实符号的有限集特征,将信道衰落系数幅度和相位分开估计,在仅获得导频位置而未知导频符号值的条件下实现了OFDM/OQAM系统半盲信道估计。并且证明了OCB-IAM算法由于利用接收符号的二阶统计量将高斯白噪声变为非随机的单音干扰,从而在中低信噪比条件下具有优于IAM算法的估计性能。仿真实验验证了理论推导的正确性和OCB-IAM算法的可靠性。     

基于改进平方根UKF双向滤波的单站无源定位算法

针对单站无源定位可观测性弱、观测噪声大而导致的定位精度低、稳定性差和收敛速度慢等问题,在结合平方根无迹卡尔曼滤波(Square-Root Unscented Kalman Filter,SRUKF)以及后向平滑思想的基础上,提出了一种改进SRUKF的双向滤波算法。该算法采用Q-R分解的形式,使用误差协方差的平方根代替协方差参与递推运算,提高了算法的稳定性与运算效率。同时,该算法对状态向量进行扩维,将过程噪声与观测噪声通过非线性系统传播,降低了噪声对滤波精度的影响,并利用当前时刻滤波结果通过Rauch-Tung-Striebel(RTS)后向平滑得到再次前向滤波更高精度的起始值,提高了算法的定位精度与收敛速度。仿真结果表明,新算法在保证实时性的基础上改善了单站无源定位的性能。     

基于多点空间直线拟合的调炮精度检测方法

针对火炮身管上标记两个点检测调炮精度受制于单个空间点坐标测量精度的问题,提出通过增加身管上标记点的冗余数量来提高调炮精度的检测方法。应用最小二乘原理对多个空间点进行直线拟合,并采用Monte Carlo方法对身管指向的测量精度进行分析。结果表明:标记4个点、5个点、6个点和7个点与标记2个点(传统方法)相比,其身管指向的测量精度分别提高了约6%、18%、19%和21%。该方法适用于对调炮精度检测要求较高的场合,综合考虑工作效率和测量精度这两个因素,推荐标记5个点测量身管指向。     

基于曲面拟合的宽带阵列模型误差有源校正

针对阵列模型误差难以建模的问题,提出一种新的非参数化有源校正方法。首先,测量部分离散方向点上的导向矢量。然后,利用测得的导向矢量拟合所有的模型误差曲面,并得到多项式系数。最后,在DOA估计时利用多项式系数计算所有方向和频率上的导向矢量。该方法适用于宽带阵列,且需要的数据存储量小。仿真实验结果表明该方法的校正误差非常小。因此,该方法具有一定的工程实用价值。     

某型多管火箭炮射击精度对重复毁伤影响

基于射击学理论和毁伤理论,采用矩阵法,建立了某型多管火箭炮射击的重复毁伤分析模型,研究了该型多管火箭炮射击误差对重复毁伤的影响,得出了射击诸元误差和射击散布误差变化对重复毁伤影响的具体规律和二者之间的不同。研究结论对于弹道修正火箭弹设计精度指标确定、弹药消耗规律研究及作战指挥决策具有参考意义。     

高分辨率UAV SAR的三维运动误差分离与补偿

在基于SAR回波的数据处理中,多普勒调频率具有很高的估计精度且对场景的依赖性很小,可以更广泛地用于自聚焦处理。基于多普勒调频率参数估计,针对回波包络及相位分别提出了误差提取模型,并通过包络误差校正和相位误差补偿两个步骤实现了高精度的运动补偿处理。实测数据表明,本文方法可以在低精度导航信息情况下获取高分辨率雷达图像。     

Some aging properties of parallel and series systems with a random number of components

In this article, we study aging properties of parallel and series systems with a random number of components. We show that the decreasing likelihood ratio property is closed under the formation of random minima. We also show, by counterexamples, that other aging properties are not closed under the formation of random minima or maxima. Some mistakes in the literature are corrected. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 238–243, 2014     

A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004